Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Differential Bearings: Notes
2021 Ford Edge SE, 4WDSECTION Notes
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
For information on Ford Color Coded Illustrations refer to OEM COLOR CODING INFORMATION
Special Tool(s) / General Equipment
| 100-002 (TOOL-4201-C)Holding Fixture with Dial Indicator Gauge | |
|---|---|
| 205-001 (TOOL-4000-E)Spreader, Differential Carrier | |
| 205-005 (T53T-4621-C)Installer, Drive Pinion Bearing Cone | |
| 205-010 (T57L-4221-A2)Installer, Differential Side Bearing | |
| 205-024 (T67P-4616-A)Installer, Drive Pinion Bearing Cup | |
| 205-105 (T76P-4020-A3)Adapter for 205-S127 | |
| 205-109 (T76P-4020-A9)Adapter for 205-S127 | |
| 205-110 (T76P-4020-A10)Gauge Block | |
| 205-111 (T76P-4020-A11)Handle | |
| 205-129 (T79P-4020-A18)Disc, Guage | |
| 205-335 (T93P-4000-A)Spreader, Differential Housing (Plate) TKIT-1993-FLM TKIT-1993-LM TKIT-1996-F/FM | |
| 205-336 (T93P-4020-A)Gauge Tube, Drive Pinion TKIT-1993-FLM TKIT-1993-LM TKIT-1996-F/FM | |
| 205-368 (T96T-4000-A)Adapter for Differential Housing Spreader TKIT-1998-LM (NavigatoR) TKIT-1996-F/FM TKIT-1996-FLM2 | |
| 205-460Protector, Drive Pinion Thread TKIT-1999A-F/LT TKIT-1999A-FM/FLM TKIT-1999A-LM | |
| 205-D044 (D81T-4221-A)Installer, Differential Carrier Bearing | |
| 205-D061 (D83T-4205-C2)Step Plate | |
| 307-003 (T57L-500-B)Holding Fixture, Transmission | |
| 308-021 (T75L-4201-A)Gauge, Clutch Housing | |
| Three Leg Puller | |
| Hydraulic Press | |
| Punch | |
| Copper Hammer | |
| Bearing Separator | |
| Caliper Gauge |
Materials
| Name | Specification |
|---|---|
| Motorcraft® Ultra Silicone SealantTA-29 | WSS-M4G323-A8 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.