Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Alignment Specifications
2021 Ford Edge SE, 4WDSECTION Alignment Specifications
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
| Item | LH | RH | Total/Split |
|---|---|---|---|
| Rear Wheel Drive (RWD) -- Regular Cab | |||
| Camber | -0.10° +/- 0.75° | -0.10° +/- 0.75° | 0.0° +/- 0.75° |
| Caster | 5.1° +/- 1.0° | 5.3° +/- 1.0° | -0.2° +/- 0.75° |
| Total toe (front) | -- | -- | 0.20° +/- 0.20° |
| Thrust angle (rear) | -- | -- | 0.0° +/- 0.50° |
| Rear Wheel Drive (RWD) -- Super Cab, Crew Cab | |||
| Camber | -0.10° +/- 0.75° | -0.10° +/- 0.75° | 0.0° +/- 0.75° |
| Caster | 5.6° +/- 1.0° | 5.8° +/- 1.0° | -0.2° +/- 0.75° |
| Total toe (front) | -- | -- | 0.20° +/- 0.20° |
| Thrust angle (rear) | -- | -- | 0.0° +/- 0.50° |
| Four-Wheel Drive (4WD) -- Regular Cab | |||
| Camber | -0.10° +/- 0.75° | -0.10° +/- 0.75° | 0.0° +/- 0.75° |
| Caster | 4.7° +/- 1.0° | 4.9° +/- 1.0° | -0.2° +/- 0.75° |
| Total toe (front) | -- | -- | 0.20° +/- 0.20° |
| Thrust angle (rear) | -- | -- | 0.0° +/- 0.50° |
| Four-Wheel Drive (4WD) -- Super Cab, Crew Cab | |||
| Camber | -0.10° +/- 0.75° | -0.10° +/- 0.75° | 0.0° +/- 0.75° |
| Caster | 5.1° +/- 1.0° | 5.3° +/- 1.0° | -0.2° +/- 0.75° |
| Total toe (front) | -- | -- | 0.20° +/- 0.20° |
| Thrust angle (rear) | -- | -- | 0.0° +/- 0.50° |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.