SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2021EDGE SE, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 541 (OEM CONNECTOR END VIEWS C3033 - C9800)CONNECTOR VIEWSCONNECTOR END VIEW (C3052) - INLINE
2021 Ford Edge SE, 4WD

Connector End View (C3052) - INLINE

2021 Ford Edge SE, 4WDSECTION Connector End View (C3052) - INLINE
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
Inline: Description Color Harness Base Part # Service Pigtail
C3052 INLINE BK 14D23314D230 Not Available

MALE 

Harness 

14D233

FEMALE 

Harness 

14D230

GFDWR124528Courtesy of FORD MOTOR COMPANY
GFDWR124529Courtesy of FORD MOTOR COMPANY
Terminal Part Number  Service Part Number  Size 
7C3T-14474-CA DU2Z-14474-DA 1.50
Pin  Circuit  Gauge  Qualifier  Terminal Part Number 
1 GD904 (BK-BU) 22 N/A
2 CPSJ5 (BU-GN) 22 N/A
3 RPSJ5 (GY) 22 N/A
4 VDB06 (GY-OG) 22 N/A
5 VDB07 (VT-OG) 22 N/A
6 VPS12 (VT-OG) 20 N/A
7 RPS12 (GN-OG) 20 N/A
8 CPS18 (BN-GN) 18 N/A
9 CPS19 (GY-VT) 18 N/A
10 CPS08 (VT-OG) 14 N/A
11 CPS07 (GY-BN) 14 N/A
12 VPSD7 (WH-VT) 22 N/A
13 RHS08 (VT-WH) 20 N/A
14 RHS02 (BU-OG) 16 N/A
14 RHS07 (BU) 16 N/A
15 CPS99 (YE) 22 N/A
16 RPS99 (BU) 22 N/A
17 VHS21 (BU-WH) 20 N/A
18 CHS12 (YE-GN) 16 N/A
19 CHS08 (BN-YE) 20 N/A
Pin  Circuit  Gauge  Qualifier  Terminal Part Number 
1 GD904 (BK-BU) 16 N/A
2 CPSJ5 (BU-GN) 20 N/A
3 RPSJ5 (GY) 20 N/A
4 VDB06 (GY-OG) 20 N/A
5 VDB07 (VT-OG) 20 N/A
6 * * N/A
7 * * N/A
8 CPS18 (BN-GN) 18 N/A
9 CPS19 (GY-VT) 18 N/A
10 CPS30 (VT-BN) 14 N/A
11 CPS29 (WH-BN) 14 N/A
12 VPSD7 (WH-VT) 22 7C3T-14474-CA
13 RHS08 (VT-WH) 20 N/A
14 GD904 (BK-BU) 16 N/A
14 RHS07 (BU) 16 N/A
15 CPS99 (YE) 20 N/A
16 RPS99 (BU) 20 N/A
17 VHS21 (BU-WH) 20 N/A
18 CHS12 (YE-GN) 16 N/A
19 CHS08 (BN-YE) 20 N/A
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.