SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2021EDGE SE, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 530 (OEM CONNECTOR END VIEWS - C100 THROUGH C257)CONNECTOR END VIEW (C218A) - CLOCKSPRING
2021 Ford Edge SE, 4WD

Connector End View (C218A) - CLOCKSPRING

2021 Ford Edge SE, 4WDSECTION Connector End View (C218A) - CLOCKSPRING
WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

Color 

GY

Harness 

14401

Base Part # 

part# N/A

Service Pigtail 

See Below

GFDW82518Courtesy of FORD MOTOR COMPANY

Check for Terminal Part Numbers

Pin  Circuit  Gauge  Circuit Function  Qualifier 
1 * * Not Used
2 RHS81 (VT-WH) 22 THERMISTOR - HEATED STEERING WHEEL -
3 VHS81 (GN-WH) 22 THERMISTOR - HEATED STEERING WHEEL +
4 VLN04 (VT-GY) 22 CTRL MOD. - IP/SWITCH ILLUMINATION
5 CR101 (VT-BN) 20 CTRL MOD. - AIR BAG DRIVER 1+ without adaptive steering
5 CRH04 (VT-GN) 22 CTRL MOD. - RELAY HORN with adaptive steering
6 GD284 (BK-GY) 22 GROUND - INSTRUMENT PANEL STRUCTURE # 4TH POINT
7 * * Not Used
8 GD215 (BK-GY) 20 GROUND - INSTRUMENT PANEL STRUCTURE # 2ND POINT
8 GD215 (BK-GN) 20 GROUND - INSTRUMENT PANEL STRUCTURE # 2ND POINT with manual column
9 VLN04 (VT-GY) 22 CTRL MOD. - IP/SWITCH ILLUMINATION
10 * * Not Used
11 CR101 (VT-BN) 20 CTRL MOD. - AIR BAG DRIVER 1+ with adaptive steering
11 RR101 (YE-GN) 20 CTRL MOD. - AIR BAG DRIVER 1 - without adaptive steering
12 RR101 (YE-GN) 20 CTRL MOD. - AIR BAG DRIVER 1 -
Available Pigtail Kits
Pigtail Kit Part Number

WPT-949 

GFDW7097Courtesy of FORD MOTOR COMPANY
 Service Part Number:

3U2Z-14S411-BMAB 

Gauge:

18 

Pin material:

Silver 

Cavities:

12 

Vehicle Uses

Control - Navigation Display

Module - Driver Door

Module - Front Interface

Monitor - Video/DVD

Switch - Gear Shift Select/Neutral Safety
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.