Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
DTC P060D - Internal Control Module Accelerator Pedal Position Performance
2021 Ford Edge SE, 4WDSECTION DTC P060D - Internal Control Module Accelerator Pedal Position Performance
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2019 Ford Transit-350 HD, 2019 Ford Transit-350, 2019 Ford Transit-250, 2019 Ford Transit-150, and 2019 Ford F-550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
DTC DESCRIPTION P060D - INTERNAL CONTROL MODULE ACCELERATOR PEDAL POSITION PERFORMANCE
| Description: | This DTC sets when a concern is detected with the accelerator pedal position (APP) sensor signal values and DTCs P2122, P2123, P2127, P2128, or P2138 are not set. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | An APP1_APP_D PID or APP2_APP_E PID reading may indicate a concern. Verify the PCM is at the latest calibration level. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST AG . | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.