Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Key ON Engine OFF (KOEO) Injector Electrical Self-Test
The KOEO injector electrical self-test is a functional test of the PCM carried out with the ignition ON and the
engine OFF. This test determines if the injectors and circuits are correctly operating. If a concern is detected by the PCM, the corresponding DTCs are displayed at the end of the self-test.
- Turn off all accessories. If the vehicle is equipped with a PTO system or auxiliary idle control, it must be turned off to carry out self-tests.
- Carry out the necessary vehicle preparation and a visual inspection. Refer to QUICK TEST DESCRIPTION
- Refer to the scan tool manufacturers manual for instructions.
- Ignition ON, engine OFF.
- Carry out the KOEO injector electrical self-test.
- Ignition in OFF position.
- Record the DTCs and carry out the appropriate pinpoint test.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.