The Hill Start Assist Feature Is Inoperative, Cannot Be Disabled Or Enabled

2021 Ford Edge SE, 4WDSECTION The Hill Start Assist Feature Is Inoperative, Cannot Be Disabled Or Enabled
WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
Possible Source Action
  • Network concern
  • IPC concern
  • PCM concern
  • RCM concern
  • ABS module concern
  • CARRY OUT the IPC self-test. DIAGNOSE all IPC DTCs. REFER to the Instrumentation, Message Center and Warning Chimes article.
  • If there are no DTCs in the IPC, CARRY OUT the PCM KOEO self-test. DIAGNOSE all PCM module DTCs. REFER to the appropriate Electronic Engine Controls article.
  • If there are no DTCs in the PCM, CARRY OUT the RCM self-test. DIAGNOSE all RCM DTCs. REFER to the Supplemental Restraint System article.
  • If there are no DTCs in the RCM, CARRY OUT the ABS module self-test. DIAGNOSE all ABS module DTCs.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.