Typical Fuel Conditioning Module (All Others)

2021 Ford Edge SE, 4WDSECTION Typical Fuel Conditioning Module (All Others)
WARNING: This page is about a different car, the 2020 Ford F-550 Super Duty, 2020 Ford F-450 Super Duty, 2020 Ford F-350 Super Duty, 2020 Ford F-250 Super Duty, and 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
G11852679Courtesy of FORD MOTOR CO.
Item Number Description
1 mdash Fuel Return Line From The Secondary Fuel Filter
2 mdash Thermostat Bypass Fuel Return Line To The Fuel Tank
3 mdash Unfiltered Fuel Supply Line From The Fuel Tank
4 mdash Filtered Fuel Return Line To The FP Assembly
5 mdash Fuel Drain Valve
6 mdash Water In Fuel (WIF) Sensor
7 mdash Fuel Filter Cover
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.