Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Typical Diagnostic Reference Values
2021 Ford Edge SE, 4WDSECTION Typical Diagnostic Reference Values
WARNING: This page does not describe the selected car, but rather 26 other vehicles, including the 2020 Lincoln Navigator, 2020 Lincoln Nautilus, 2020 Lincoln MKZ, 2020 Lincoln Corsair, and 2020 Lincoln Continental. However, it is still accessible from the selected car via links, so may be relevant.
| Inputs | Component/PID Only | Measured/PID Values | Units Measured/PID | |||
|---|---|---|---|---|---|---|
| KOEO | Hot Idle | 48 KM/H (30 MPH) | 89 KM/H (55 MPH) | |||
| AAT | AAT Sensor | 1 (33.80) | 18 (64.40) | 0 (32) | 2 (35.60) | DEG C (DEG F) |
| AC_ REQ | PID | NO | NO | NO | NO | YES/NO |
| APP | APP Sensor | 0 | 0 | 17 | 26.50 | % |
| APP1 | APP Sensor | 0.78 | 0.78 | 1.30 | 1.58 | VOLTS |
| APP1 (APP_D) | APP Sensor | 15.29 | 15.29 | 25.88 | 31.37 | % |
| APP2 | APP Sensor | 0.39 | 0.39 | 0.66 | 0.80 | VOLTS |
| APP2 (APP_E) | APP Sensor | 7.84 | 7.84 | 12.94 | 15.68 | % |
| APP_ MAXDIFF | PID | 0 | 0 | -0.06 | 0 | DEG |
| APP_ MODE | PID | NO PEDAL | NO PEDAL | PART PEDAL | PART PEDAL | NO PEDAL/PART PEDAL |
| B+ | PID | 12.45 | 14.44 | 14.16 | 14.05 | VOLTS |
| BARO | PID | 3.92/99 (14.36)/156.11 | 3.92/99 (14.36)/156.11 | 3.92/99 (14.36)/156.11 | 3.92/99 (14.36)/156.11 | VOLTS/kPa (PSI)/Hz |
| BOO1 | BPP Switch | OFF | OFF | OFF | OFF | ON/OFF |
| BOO2 | BPP Switch | OFF | OFF | OFF | OFF | ON/OFF |
| BRKOVRD_ POSS | PID | 11 | 11 | 12 | 12 | NUMERIC VALUE |
| BRKOVR_ ACTION | PID | 0 | 0 | 0 | 0 | NUMERIC VALUE |
| CAC_T | CACT Sensor | 0 (32) | 0 (32) | 0 (32) | 0 (32) | DEG C (DEG F) |
| CHT2 | CHT2 Sensor | 99 (210.20) | 106 (222.80) | 102 (215.60) | 106 (222.80) | DEG C (DEG F) |
| CHT2_V | CHT2 Sensor | 3.33 | 3.13 | 3.23 | 3.13 | VOLTS |
| CLRDIST | PID | 219.95 (136.67) | 219.95 (136.67) | 219.95 (136.67) | 221.95 (137.91) | KM (MILES) |
| CPP_BOT | CPP Switch | NO | NO | NO | NO | YES/NO |
| CRNKAS_PRS | B15 | 0 (0) | 74 (10.73) | 2 (0.29) | 51 (7.40) | Pa (PSI) |
| CRNKAS_P_V | B15 | 3.97 | 3.96 | 3.93 | 3.95 | VOLTS |
| DECHOKE | PID | YES | NO | NO | NO | YES/NO |
| DIST_ BRKOVRD | PID | 94.44 (58.68) | 94.44 (58.68) | 99.93 (62.09) | 98.43 (61.16) | KM (MILES) |
| DTCCNT | PID | 0 | 0 | 0 | 0 | Numeric Value |
| ECT | ECT Sensor | 0.63/88 (190.40) | 0.58/91 (195.80) | 0.59/90 (194) | 0.56/92 (197.60) | VOLTS/DEG C (DEG F) |
| EONV_RDY | PID | NOT READY | NOT READY | NOT READY | NOT READY | READY/NOT READY |
| EQ_RAT11 | PID | 0:1 | 14.35:1 | 14.47:1 | 14.56:1 | RATIO |
| ETC_ACT | PID | 13.70 | 0.08 | 1.60 | 14.11 | DEG |
| ETC_TRIM | PID | -0.62 | -0.62 | -1 | -1 | DEG |
| FLI | Fuel Level Sensor | 98.82 (H) | 98.82 (H) | 89.02 (H) | 98.82 (H) | % |
| FLP | Fuel Pressure Sensor | 559 (81.08) | 625.50 (90.72) | 637 (92.39) | 621 (90.07) | kPa (PSI) |
| FLP_V | Fuel Pressure Sensor | 3.58 | 4.00 | 4.08 | 3.97 | VOLTS |
| FPM | PID | 39.39 | 39.40 | 40.84 | 40.32 | % |
| FRP | FRP Sensor | 1.46/4.82 (699.08) | 1.11/3.09 (448.17) | 1.24/3.65 (529.39) | 2.17/8.41 (1219.77) | VOLTS/MPa (PSI) |
| FTP | FTP Sensor | 2.61/-5 (0) | 2.61/-5 (0) | 2.58/-65 (-0.01) | 2.59/(-0.01) | VOLTS/Pa (PSI) |
| HTRCM12 | HO2S12 Sensor | 0 | 0 | 1.42 | 1.42 | A |
| IAT | IAT Sensor | 1.85/38 (100.40) | 1.95/35 (95) | 3.31/7 (44.60) | 3.28/7 (44.60) | VOLTS/DEG C (DEG F) |
| KEYST | Ignition Switch | ON | ON | ON | ON | ON/OFF |
| KNOCK_1 | KS1 Sensor | 198 | 43 | 24 | 20 | COUNT |
| LOAD | PID | 0.00 (I) | 20.39 | 20.39 | 36.86 | % |
| MAP | MAP Sensor | 99 (14.36) | 54 (7.83) | 61 (8.85) | 87 (12.62) | kPa (PSI) |
| MAP_GAUGE | MAP Sensor | 2 (0.29) | 47 (6.82) | 40 (5.80) | 14 (2.03) | kPa (PSI) |
| MAP_V | MAP Sensor | 1.60 | 0.92 | 1.05 | 1.42 | VOLTS |
| MIL_DIS | PID | 0 (0) | 0 (0) | 0 (0) | 0 (0) | KM (MILES) |
| MISFIRE | PID | NO | NO | NO | NO | YES/NO |
| MP_LRN | PID | YES | YES | YES | YES | YES/NO |
| NUM_ MISFIRE | PID | 0 | 2 | 5 | 5 | COUNT |
| O2S11_CUR | HO2S11 Sensor | (I) | switching | switching | switching | mA/uA |
| O2S11_ IMPED | HO2S11 Sensor | 4.93 | 1 | 1 | 1 | VOLTS |
| O2S11_ READY | HO2S11 Sensor | NO | YES | YES | YES | YES/NO |
| O2S11_TR | HO2S11 Sensor | 0 | 0 | 0 | 0 | Kohm |
| O2S12 | HO2S12 Sensor | (I) | switching (D) | switching (D) | switching (D) | VOLTS |
| OCTADJ_R_ LRND | PID | -36.93 | -36.93 | -36.93 | -36.29 | % |
| RPM | CKP Sensor | 0 | 1158 | 1693.50 | 2092 | RPM |
| SYNC | PID | NO | YES | YES | YES | YES/NO |
| TCBP | TCBP Sensor | 99.48 (14.43) | 101.41 (14.71) | 100.44 (14.57) | 110.09 (15.97) | kPa (PSI) |
| TCBP_V | TCBP Sensor | 1.60 | 1.63 | 1.62 | 1.76 | VOLTS |
| TP1 | ETBTPS | 3.85/22.74 | 4.39/12.15 | 4.24/14.90 | 3.71/25.49 | VOLTS/% |
| TP1_LRN_ TRIM | ETBTPS | 15.37 | 15.37 | 15.37 | 15.37 | DEG |
| TP2 | ETBTPS | 1.13/22.74 | 0.60/11.76 | 0.74/14.51 | 1.28/25.49 | VOLTS/% |
| TP2_LRN_ TRIM | ETBTPS | 15.12 | 15.12 | 15.12 | 15.12 | DEG |
| TP_MAXDIFF | PID | -0.06 | 0 | 0 | -0.12 | % |
| TURBO_ BP1_STAT | TCBY Valve | NO FAULT | NO FAULT | NO FAULT | NO FAULT | FAULT/NO FAULT |
| VCTSYS | PID | OPEN LOOP | CLOSED LOOP | CLOSED LOOP | CLOSED LOOP | OPEN LOOP/CLOSED LOOP |
| VCT_EXH_ ACT1 | PID | 0 | -0.31 | 34.87 | 34.93 | DEG |
| VCT_EXH_ DIF1 | PID | 0 | 0.31 | 0.06 | 0 | DEG |
| VCT_INT_ ACT1 | PID | 0 | 0.18 | -17.31 | -15.68 | DEG |
| VCT_INT_ DIF1 | PID | 0 | -0.25 | 0.31 | 0.18 | DEG |
| VSS | PID | 0 (0) | 0 (0) | 48 km/h (30 MPH) | 89 km/h (55 MPH) | km/h/MPH |
| Outputs | Component/PID Only | Measured/PID Values | Units Measured/PID | |||
|---|---|---|---|---|---|---|
| KOEO | Hot Idle | 48 KM/H (30 MPH) | 89 KM/H (55 MPH) | |||
| CACC_FAN | Charge Air Cooler Cooling Fan | 0 | 0 | 0 | 0 | % |
| CACC_FANSTAT | Charge Air Cooler Cooling Fan | NO FAULT | NO FAULT | NO FAULT | NO FAULT | STATUS |
| CYL_1-3_ACCL | PID | (I) | -1 TO +1 | -1 TO +1 | -1 TO +1 | NUMERIC VALUE |
| ETC [TAC_PCT] | PID | 10.98 | 0 | 1.56 | 17.25 | % |
| EVAP020C | PID | NO | NO | NO | NO | YES/NO |
| EVAPCP | EVAPCP Valve | 0 | 96.92 | 92.95 | 100 | % |
| EVAPCV | CANV Valve | 0/OFF | 0/OFF | 0/OFF | 0/OFF | %/ON-OFF |
| EVAPSOAK | PID | NO | NO | NO | NO | YES/NO |
| EVAPSTA | PID | NOT RUNNING | NOT RUNNING | NOT RUNNING | NOT RUNNING | STATUS |
| FANDC | PID | 7.84 | 7.84 | 7.84 | 7.84 | % |
| FAN_DSD | PID | 7.99 | 7.99 | 7.99 | 7.99 | % |
| FP | Fuel Pump Control Module | 75/OFF | 25.12/ON | 26.11/ON | 25.67/ON | %/ON/OFF |
| FUELSYS | PID | OPEN LOOP | CLOSED LOOP | CLOSED LOOP | CLOSED LOOP | OPEN LOOP/CLOSED LOOP |
| F_VCV | Fuel Injection Pump | 0 | 7.03 | 11.12 | 2.46 | % |
| HTR11 | HO2S11 Sensor | OFF | ON | ON | ON | VOLTS/ON/OFF |
| HTR12 | HO2S12 Sensor | OFF | ON | ON | ON | VOLTS/ON/OFF |
| INJ1-3_OFF | Injector 1-3 | -- | -- | -- | -- | --/DISABLE |
| LONGFT1 | PID | (I) | -20 TO +20 | -20 TO +20 | -20 TO +20 | % |
| MIL | PID | OFF | OFF | OFF | OFF | ON/OFF |
| O2S11_HTR | HO2S11 Sensor | 0 | 33.72 | 27.05 | 25.88 | % |
| O2_DS_ DISBL | PID | YES | NO | NO | NO | YES/NO |
| PATSENABL | PID | DISABLED | ENABLED | ENABLED | ENABLED | ENABLED/DISABLED |
| RO2FT1 | PID | 0 | -1.73 | -1.72 | 1.51 | % |
| SHRTFT1 | PID | (I) | -10 TO +10 | -10 TO +10 | -10 TO +10 | % |
| SPARKADV | PID | 10 | -14.75 | 30 | 8.25 | DEG |
| TQ_CNTRL | PID | ANTI THEFT | IDLE SPEED CONTROL | NONE REQUESTED | TORQUE BASED DECEL | STATUS |
| TURBO_ BPASS | TCBY Valve | OFF | OFF | OFF | OFF | ON/OFF |
| TURBO_ WGATE | Turbocharger Wastegate Regulating Valve Solenoid | 16.95 | 57.34 | 22.01 | 14.99 | % |
| VCT_EXH_ DC1 | VCT12 Solenoid | 0 | 0 | 42.25 | 45.14 | % |
| VCT_INT_ DC1 | VCT11 Solenoid | 0 | 0 | 37.63 | 39.83 | % |
| Other | Component/PID Only | Measured/PID Values | Units Measured/PID | |||
|---|---|---|---|---|---|---|
| KOEO | Hot Idle | 48 KM/H (30 MPH) | 89 KM/H (55 MPH) | |||
| VPWR | PID | VBAT | VBAT | VBAT | VBAT | VOLTS |
| VREF | PID | 5 | 5 | 5 | 5 | VOLTS |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.