Section 379 (Engine - 2.7L ECOBOOST (238KW/324PS)): Specifications: Camshaft

2021 Ford Edge SE, 4WDSECTION Camshaft
WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
Item Specification
Theoretical valve lift (intake) @ 0 lash 0.3937 in (10 mm)
Theoretical valve lift (exhaust) @ 0 lash 0.3543 in (9 mm)
Lobe lift - intake 0.2067 in (5.25 mm)
Lobe lift - exhaust 0.1870 in (4.75 mm)
Camshaft journal bore inside diameter -- 1st journal 0.0011 -0.0028 in (.027 -.072 mm)
Camshaft journal bore inside diameter -- intermediate journals 0.0011 -0.0028 in (.027 -.072 mm)
Camshaft bearing outside diameter -- 1st journal 1.3764 -1.3772 in (34.96 -34.98 mm)
Camshaft bearing outside diameter -- intermediate journals 1.1263 -1.1273 in (28.607 -28.633 mm)
End play 0.0010 -0.0059 in (.025 -.15 mm)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.