Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Exploded View Of Engine -- Upper Components
2021 Ford Edge SE, 4WDSECTION Exploded View Of Engine -- Upper Components
WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Part Number | Description |
|---|---|---|
| 1 | 6K682 | RH turbocharger |
| 2 | 8592 | Coolant outlet connector pipe |
| 3 | 6051 | RH cylinder head gasket |
| 4 | 6049 | RH cylinder head |
| 5 | 6250 | RH intake camshaft |
| 6 | 6250 | RH exhaust camshaft |
| 7 | 9D376 | High pressure fuel pump |
| 8 | 6582 | RH valve cover |
| 9 | 9F991 | Throttle body |
| 10 | 9424 | Intake manifold |
| 11 | 9F797 | RH Fuel rail (direct injection) |
| 12 | 9F797 | LH Fuel rail (direct injection) |
| 13 | 6582 | LH valve cover |
| 14 | 6049 | LH cylinder head |
| 15 | 6051 | LH cylinder head gasket |
| 16 | 6C524 | Intake variable Camshaft Timing (VCT) solenoid (2 required) |
| 17 | 6C525 | Exhaust variable Camshaft Timing (VCT) solenoid (2 required) |
| 18 | -- | Camshaft bearing cap (part of 6049) (2 required) |
| 19 | -- | Camshaft bearing cap (part of 6049) (12 required) |
| 20 | 2A451 | Vacuum pump |
| 21 | 6250 | LH intake camshaft |
| 22 | 6250 | LH exhaust camshaft |
| 23 | -- | Camshaft bearing cap (part of 6049) (2 required) |
| 24 | 6C879 | LH turbocharger |
| 25 | 9H487 | RH Fuel rail (port injection) |
| 26 | 9H487 | LH Fuel rail (port injection) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.