Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Exploded View Of Intake Manifolds and Turbocharger
2021 Ford Edge SE, 4WDSECTION Exploded View Of Intake Manifolds and Turbocharger
WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Part Number | Description |
|---|---|---|
| 1 | 9E926 | TB (throttle body) |
| 2 | 9E964 | Fuel rail supply tube assembly |
| 3 | 9D430 | Vacuum hose connector assembly |
| 4 | 9K022 | Fuel injector return hose assembly |
| 5 | 9J280 | Fuel injection pump supply tube assembly |
| 6 | 9N184 | Secondary fuel filter |
| 7 | 6N646 | Turbocharger downpipe |
| 8 | 8287 | Turbocharger downpipe clamp |
| 9 | 6K682 | Turbocharger |
| 10 | 9B613 | Turbocharger inlet hose |
| 11 | 9424 | Lower intake manifold |
| 12 | 9G478 | Turbocharger heat shield |
| 13 | 9U469 | Turbocharger coolant outlet tube |
| 14 | 9H449 | EGR (exhaust gas recirculation) cooler outlet pipe |
| 15 | 12B591 | EGRT (exhaust gas recirculation temperature) sensor |
| 16 | 9F464 | EGR cooler assembly |
| 17 | 6A785 | Crankcase vent oil separator |
| 18 | 9424 | Upper intake manifold |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.