Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Pinpoint Test F : Electronic Shift-On-The-Fly (ESOF) System Functional Test: Notes
Locator views for the vacuum lines and vacuum reservoir are located in Description and Operation. REFER to: FOUR-WHEEL DRIVE SYSTEMS - SYSTEM OPERATION AND COMPONENT DESCRIPTION . Refer to TWO WHEEL DRIVE/FOUR WHEEL DRIVE SYSTEMS for schematic and connector information.
Normal Operation
When operating in 4H or 4L mode, the transfer case and both IWEs are locked. When in 4L mode, the transfer case low range gear set provides an additional 2.64 gear reduction. When operating in 2H mode, the transfer case and both IWEs are unlocked.
Possible Sources
- 4WD system and/or related components
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.