Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2021EDGE SE, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 326 (HANDLES, LOCKS, LATCHES AND ENTRY SYSTEMS)
2021 Ford Edge SE, 4WD
Section 326 (Handles, Locks, Latches And Entry Systems)
2021 Ford Edge SE, 4WDSECTION Section 326 (Handles, Locks, Latches And Entry Systems)
WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- Description And Operation
- Handles, Locks, Latches and Entry Systems - Overview
- Handles, Locks, Latches and Entry Systems - System Operation and Component Description
- Diagnosis And Testing
- Locks, Latches and Entry Systems
- DTC Chart(s)
- Symptom Charts
- Pinpoint Tests
- Pinpoint Test A : Hard To Open Or Close A Door From Either Door Handle
- Pinpoint Test B : A Door Is Difficult Or Does Not Open From The Exterior Door Handle
- Pinpoint Test C : A Door Is Difficult Or Does Not Open From The Interior Door Handle
- Pinpoint Test D : The Exterior Door Release Handle Sticks
- Pinpoint Test E : The Interior Door Release Handle Sticks
- Pinpoint Test F : Squeak-Rattle-Chucking Noise From Door
- Pinpoint Test G : The Manual Door Lock Cylinder Is Inoperative
- Pinpoint Test H : The Ignition Lock Cylinder Is Difficult To Turn
- Pinpoint Test I : All Door Locks Are Inoperative (Do Not Lock And Do Not Unlock)
- Pinpoint Test J : A Single Or More Than One Door Lock Is Inoperative
- Pinpoint Test K : The Door Locks Operate Only One Way
- Pinpoint Test L : All Door Locks Are Inoperative From One Door Lock Control Switch
- Pinpoint Test M : The Tailgate Lock Is Inoperative
- Pinpoint Test N : The Tailgate Latch Release Is Inoperative
- Pinpoint Test O : The Doors Do Not Lock Or Unlock Using The Keyless Entry Keypad
- Pinpoint Test P : The Keyless Entry Keypad Illumination Is Inoperative
- Pinpoint Test Q : The Keyless Entry Keypad Illumination Is Always On
- Pinpoint Test R : The RKE (Remote Keyless Entry) Transmitter Is Inoperative
- Pinpoint Test S : An Individual Button/Feature Is Inoperative From The RKE (Remote Keyless Entry) Transmitter
- Pinpoint Test T : The RKE (Remote Keyless Entry) Transmitter Has Poor Range Performance
- Pinpoint Test U : The Remote Start Feature Is Inoperative
- Pinpoint Test V : A Door Passive Entry Feature Is Inoperative
- Pinpoint Test W : The Tailgate Passive Entry Feature Is Inoperative
- Pinpoint Test X : U0146:00
- Pinpoint Test Y : U0258:87 Or U1A00:00
- Pinpoint Test Z : U0140:00
- Pinpoint Test Aa : U0208:00
- Pinpoint Test Ab : U0232:00
- Pinpoint Test Ac : U0233:00
- Pinpoint Test Ad : P1594 Or P1595
- Locks, Latches and Entry Systems
- General Procedures
- Removal And Installation
- Door Lock Cylinder
- Exterior Front Door Handle
- Exterior Rear Door Handle - SuperCrew
- Front Door Latch
- Front Door Lock Control Switch
- Hood Latch
- Hood Latch Release Cable
- Hood Latch Release Handle
- Ignition Lock Cylinder
- Interior Front Door Handle
- Interior Rear Door Handle - SuperCrew
- Interior Rear Door Handle - SuperCab
- Keyless Entry Keypad
- Keyless Entry Rear Antenna
- Rear Door Cable - SuperCab
- Rear Door Latch - SuperCrew
- Rear Door Lower Latch - SuperCab
- Rear Door Upper Latch - SuperCab
- Tailgate Latch
- Tailgate Latch Actuator
- Tailgate Latch Control Assembly
- Tailgate Lock Cylinder
- Tailgate Release Handle
- Tailgate Release Switch
- Front Door Lock Actuator
- Rear Door Lock Actuator - SuperCrew
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.