Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Alignment Specifications
2021 Ford Edge SE, 4WDSECTION Alignment Specifications
WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
| Item | LH | RH | Total/Split |
|---|---|---|---|
| Rear Wheel Drive (RWD) -- Regular Cab | |||
| Camber | -0.10 deg. +/- 0.75 deg. | -0.10 deg. +/- 0.75 deg. | 0.0 deg. +/- 0.75 deg. |
| Caster | 3.5 deg. +/- 1.0 deg. | 3.9 deg. +/- 1.0 deg. | -0.2 deg. +/- 0.75 deg. |
| Total toe (front) | -- | -- | 0.20 deg. +/- 0.20 deg. |
| Thrust angle (rear) | -- | -- | 0.0 deg. +/- 0.50 deg. |
| Rear Wheel Drive (RWD) -- Super Cab, Crew Cab | |||
| Camber | -0.10 deg. +/- 0.75 deg. | -0.10 deg. +/- 0.75 deg. | 0.0 deg. +/- 0.75 deg. |
| Caster | 3.8 deg. +/- 1.0 deg. | 4.2 deg. +/- 1.0 deg. | -0.2 deg. +/- 0.75 deg. |
| Total toe (front) | -- | -- | 0.20 deg. +/- 0.20 deg. |
| Thrust angle (rear) | -- | -- | 0.0 deg. +/- 0.50 deg. |
| Four-Wheel Drive (4WD) -- Regular Cab | |||
| Camber | -0.10 deg. +/- 0.75 deg. | -0.10 deg. +/- 0.75 deg. | 0.0 deg. +/- 0.75 deg. |
| Caster | 3.1 deg. +/- 1.0 deg. | 3.5 deg. +/- 1.0 deg. | -0.2 deg. +/- 0.75 deg. |
| Total toe (front) | -- | -- | 0.20 deg. +/- 0.20 deg. |
| Thrust angle (rear) | -- | -- | 0.0 deg. +/- 0.50 deg. |
| Four-Wheel Drive (4WD) -- Super Cab, Crew Cab | |||
| Camber | -0.10 deg. +/- 0.75 deg. | -0.10 deg. +/- 0.75 deg. | 0.0 deg. +/- 0.75 deg. |
| Caster | 3.4 deg. +/- 1.0 deg. | 3.8 deg. +/- 1.0 deg. | -0.2 deg. +/- 0.75 deg. |
| Total toe (front) | -- | -- | 0.20 deg. +/- 0.20 deg. |
| Thrust angle (rear) | -- | -- | 0.0 deg. +/- 0.50 deg. |
| Raptor -- Super Cab, Crew Cab | |||
| Camber | -0.50 deg. +/- 0.75 deg. | -0.50 deg. +/- 0.75 deg. | 0.0 deg. +/- 0.75 deg. |
| Caster | 3.5 deg. +/- 1.0 deg. | 3.5 deg. +/- 1.0 deg. | 0.0 deg. +/- 0.75 deg. |
| Total toe (front) | -- | -- | 0.20 deg. +/- 0.20 deg. |
| Thrust angle (rear) | -- | -- | 0.0 deg. +/- 0.50 deg. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.