Connector End View (C501B) - DRIVER DOOR MODULE (DDM)

2021 Ford Edge SE, 4WDSECTION Connector End View (C501B) - DRIVER DOOR MODULE (DDM)
WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
Connector: Description Color Harness Base Part # Service Pigtail
C501B DRIVER DOOR MODULE (DDM) BK 14631 part# N/A See Below
GFDWR82443Courtesy of FORD MOTOR COMPANY
Terminal Part Number  Service Part Number  Size 
8U5T-14474-BB DU2Z-14474-CA 0.64
Pin  Circuit  Gauge  Circuit Function  Qualifier  Terminal Part Number 
1 CPS15 (VT-WH) 22 SWITCH - MEMORY DRIVER P1 8U5T-14474-BB
2 CPS17 (BU-OG) 22 SWITCH - MEMORY DRIVER P3 8U5T-14474-BB
3 CPS16 (YE) 22 SWITCH - MEMORY DRIVER P2 8U5T-14474-BB
4 * * Not Used N/A
5 LPM30 (GY-VT) 22 CTRL MOD. - SENSORS MIRROR POSITION (LEFT) + 8U5T-14474-BB
6 VPM35 (YE-BU) 22 SENSOR - LEFT MIRROR POSITION # HORIZONTAL 8U5T-14474-BB
7 CPM29 (GN) 22 CTRL MOD. - LEFT MIRROR UP 8U5T-14474-BB
8 CPM28 (BU-BN) 22 CTRL MOD. - LEFT MIRROR RIGHT 8U5T-14474-BB
9 CPM39 (GN-VT) 22 CTRL MOD. - LEFT MIRROR FOLD OUT (DRV) 8U5T-14474-BB
10 CLN31 (VT-GN) 22 CTRL MOD. - PUDDLE LAMP LEFT 8U5T-14474-BB
11 * * Not Used N/A
12 * * Not Used N/A
13 * * Not Used N/A
14 * * Not Used N/A
15 RRB06 (GY-VT) 22 CTRL MOD. - BLINDSPOT WARNING # LED MIRROR LEFT OR DRIVER - 8U5T-14474-BB
16 VPM36 (BN-YE) 22 SENSOR - LEFT MIRROR POSITION # VERTICAL 8U5T-14474-BB
17 RPM05 (VT-GN) 22 CTRL MOD. - LEFT MIRROR RETURN 8U5T-14474-BB
18 CPM04 (VT-BN) 22 CTRL MOD. - LEFT MIRROR FOLD IN 8U5T-14474-BB
19 CRB06 (GN-WH) 22 CTRL MOD. - BLINDSPOT WARNING # LED MIRROR LEFT OR DRIVER + 8U5T-14474-BB
20 * * Not Used N/A

Available Pigtail Kits 

Pigtail Kit Part Number WPT-1542

GFDWR877Courtesy of FORD MOTOR COMPANY

Service Part Number:

JU2Z-14S411-YA 

Gauge:

20 

Pin material:

Silver 

Cavities:

20 

Vehicle Uses:

  • Control Head - Manual Climate
  • Module - Driver Door
  • Module - Electronic Automatic Temperature Control (EATC)
  • Module - Front Interface
  • Module - Passenger Door
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.