Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
General Specifications
2021 Ford Edge SE, 4WDSECTION General Specifications
WARNING: This page is about a different car, the 2019 Ford F-350 Super Duty and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Specification |
|---|---|
| Fuel Pressure | |
| KOER | 50.8 -62.4 psi (350 -430 kPa) |
| KOEO | 50.8 -62.4 psi (350 -430 kPa) |
| Fuel Tank Capacity | |
| Chassis Cab Aft-of-axle fuel tank | 40 gal (151 L) |
| Chassis Cab fuel tank (midship) | 26.5 gal (100.3 L) |
| Midship plastic fuel tank 142/148/160/164 inch wheelbases |
34 gal (128.7 L) |
| Midship plastic fuel tank 176 inch wheelbase |
48 gal (181 L) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.