Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2021EDGE SE, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 244 (ENGINE - 6.2L V8)SPECIFICATIONSVALVE
2021 Ford Edge SE, 4WD
Section 244 (Engine - 6.2L V8): Specifications: Valve
2021 Ford Edge SE, 4WDSECTION Valve
WARNING: This page is about a different car, the 2019 Ford F-350 Super Duty and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Specification |
|---|---|
| Valve stem diameter -- intake | 0.3123 -0.3131 in (7.933 -7.953 mm) |
| Valve stem diameter -- exhaust | 0.3119 -0.3126 in (7.921 -7.941 mm) |
| Valve stem-to-guide clearance -- intake | 0.0009 -0.0028 in (.022 -.072 mm) |
| Valve stem-to-guide clearance -- exhaust | 0.0013 -0.0033 in (.034 -.084 mm) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.