Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2021EDGE SE, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 244 (ENGINE - 6.2L V8)SPECIFICATIONSENGINE
2021 Ford Edge SE, 4WD
Section 244 (Engine - 6.2L V8): Specifications: Engine
2021 Ford Edge SE, 4WDSECTION Engine
WARNING: This page is about a different car, the 2019 Ford F-350 Super Duty and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Specification |
|---|---|
| Bore | 4.0157 in (102 mm) |
| Stroke | 3.7402 in (95 mm) |
| Displacement | 6.2L (379 CID) |
| No. of cylinders | 8 |
| Compression ratio | 9.8:1 |
| Engine weight (without accessory drive components and with flexplate) | 579.82 lb (263 kg) |
| Engine weight (without accessory drive components and with flywheel) | 593.04 lb (269 kg) |
| Firing order | 1-5-4-8-6-3-7-2 |
| Spark plug | 12405 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.