Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2021EDGE SE, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 244 (ENGINE - 6.2L V8)SPECIFICATIONSCYLINDER BLOCK
2021 Ford Edge SE, 4WD
Cylinder Block
2021 Ford Edge SE, 4WDSECTION Cylinder Block
WARNING: This page is about a different car, the 2019 Ford F-350 Super Duty and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Specification |
|---|---|
| Cylinder bore diameter -- grade 1 | 4.0157 -4.0161 in (102 -102.01 mm) |
| Cylinder bore diameter -- grade 2 | 4.0161 -4.0165 in (102.01 -102.02 mm) |
| Cylinder bore diameter -- grade 3 | 4.0165 -4.0169 in (102.02 -102.03 mm) |
| Cylinder bore maximum taper | 0.0006 in (.016 mm) |
| Cylinder bore maximum out-of-round | 0.0008 in (.02 mm) |
| Main bearing bore inside diameter | 2.850 -2.851 in (72.4 -72.424 mm) |
| Head gasket surface flatness | 0.03 mm (0.001 in) in any 40 mm (1.5 in) x 40 mm (1.5 in) area; 0.05 mm (0.002 in) in any 150 mm (6 in) x 150 mm (6 in) area; 0.025 mm (0.0009) in any 25 mm (0.984 in) x 25 mm (0.984 in) area overall |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.