Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Symptom Chart: Power Adjustable Steering Column
2021 Ford Edge SE, 4WDSECTION Symptom Chart: Power Adjustable Steering Column
WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
| Condition | Possible Sources | Actions |
|---|---|---|
| A module does not respond to the diagnostic scan tool | Fuse Wiring, terminals or connectors SCCM concern DSM concern |
REFER to: Communications Network . |
| The adjustable steering column is inoperative in one or more directions using the steering column control switch | Refer to the Pinpoint Test | GO to Pinpoint Test A |
| The adjustable steering column is inoperative in one or more directions using the memory position switch | Refer to the Pinpoint Test | GO to Pinpoint Test B |
| The adjustable steering column is inoperative in one or more directions using the RKE transmitter | Refer to the Pinpoint Test | GO to Pinpoint Test B |
| The adjustable steering column is inoperative in one or more directions using the easy entry/easy exit feature | Refer to the Pinpoint Test | GO to Pinpoint Test B |
| The adjustable steering column operates in one second intervals when using the steering column control switch (jog mode) | Refer to the Pinpoint Test | GO to Pinpoint Test C |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.