Network Message Chart

2021 Ford Edge SE, 4WDSECTION Network Message Chart
WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

Module Network Input Messages -- Body Control Module (BCM)Β 

Broadcast Message Originating Module Message Purpose
Alternator fault PCM The PCM has detected a fault in the generator or generator circuits.

Module Network Input Messages -- Instrument Panel Cluster (IPC)Β 

Broadcast Message Originating Module Message Purpose
Power system status BCM Reports any generator/charging system faults. Used for charging system fault indicator.
Load Shed Request BCM Used to indicate what level of load shed is commanded.

Module Network Input Messages -- Powertrain Control Module (PCM)Β 

Broadcast Message Originating Module Message Purpose
Load Shed Request BCM Used to indicate what level of load shed is commanded.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.