SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2021EDGE SE, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2 (ENGINE CONTROLS - REFERENCE VALUES (EXCEPT DIESEL & HYBRID))1.5L TIVCT KATYPICAL DIAGNOSTIC REFERENCE VALUES
2021 Ford Edge SE, 4WD

Typical Diagnostic Reference Values

2021 Ford Edge SE, 4WDSECTION Typical Diagnostic Reference Values
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2018 Lincoln Navigator, 2018 Lincoln MKZ, 2018 Lincoln MKX, 2018 Lincoln MKT, and 2018 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.
Inputs Component/PID Only Measured/PID Values Units Measured/PID
KOEO Hot Idle 48 KM/H (30 MPH) 89 KM/H (55 MPH)
AC_REQ PID NO NO NO NO YES/NO
APP APP Sensor 0 0 2.50 13.50 %
APP_MAXDIFF PID 0 0 -0.06 0 DEG
APP_MODE PID NO PEDAL NO PEDAL PART PEDAL PART PEDAL NO PEDAL/PART PEDAL
APP1 APP Sensor 0.95 0.95 1.12 1.83 VOLTS
APP1 (APP_D) APP Sensor 7.84 7.84 9.02 14.90 %
APP2 APP Sensor 0 0 0 0 VOLTS
APP2 (APP_E) APP Sensor 0 0 0 0 %
B+ PID 12.73 14.28 14.15 14.26 VOLTS
BARO PID 98.94 (14.35)/156.11/397.44 98.94 (14.35)/156.11/397.44 98.94 (14.35)/156.11/397.44 98.94 (14.35)/156.11/397.44 kPa (PSI)/Hz/in-H 2 O
BOO1 BPP Switch OFF OFF OFF OFF ON/OFF
BOO2 BPP Switch OFF OFF OFF OFF ON/OFF
BRKOVR_ACTION PID 0 0 0 0 NUMERIC VALUE
BRKOVRD_POSS PID 16 16 17 17 NUMERIC VALUE
CPP_BOT (MT) CPP Switch NO NO NO NO YES/NO
DECHOKE PID YES NO NO NO YES/NO
DIST_BRKOVRD PID 37.48 (23.29) 37.48 (23.29) 37.98 (23.60) 43.47 (27.01) KM (MILES)
ECT ECT Sensor 96 (204.80) 89 (192.20) 88 (190.40) 90 (194) DEG C (DEG F)
EQ_RAT11 PID 0/0:1 0.99/14.56:1 1.01/14.72:1 1.01/14.71:1 RATIO
ETC_ACT PID 6.98 1.02 2.55 11.14 DEG
ETC_TRIM PID 0.13 0.12 0.08 -0.05 DEG
FLI Fuel Level Sensor 96.07 96.07 96.07 89.02 %
FPM Fuel Pump Control Module 59.40 59.43 59.41 59.99 %
HTRCM11 HO2S11 Sensor 0 1.62 1.59 1.59 AMPS
HTRCM12 HO2S12 Sensor 0 1.94 1.84 1.84 AMPS
IAT IAT Sensor 1.67/36 (96.80) 1.85/31 (87.80) 1.60/37 (98.60) 2.39/19 (66.20) VOLTS/DEG C (DEG F)
INJPWR_M PID 12.62 14.18 14.16 14.11 VOLTS
KEYST Ignition Switch ON ON ON ON ON/OFF
KNOCK_1 KS1 Sensor 0 150 103 89 N/A
KNOCK_2 KS2 Sensor 0 201 121 99 N/A
LOAD_ABSL PID 0 18.82 26.66 32.15 %
LONGFT1 PID (I) -20 TO +20 -20 TO +20 -20 TO +20 %
MAP MAP Sensor 5/98.94 (14.35) 1.52/35.99 (5.22) 2.37/57.98 (8.41) 2.48/58.95 (8.55) VOLTS/kPa (PSI)
MAP_GAUGE MAP Sensor 8.02 260.95 172.62 168.61 in-H 2 O
MISFIRE PID NO NO NO NO YES/NO
MP_LRN PID YES YES YES YES YES/NO
NUM_MISFIRE PID 0 0 19 43 COUNT
O2S11_CUR HO2S11 Sensor (D) switching (A) switching (A) switching (A) uA
O2S11_IMPED HO2S11 Sensor 3.82 0.99 0.99 0.99 VOLTS
O2S11_READY HO2S11 Sensor NO YES YES YES YES/NO
O2S11_TR HO2S11 Sensor 0 0 0 0 Kohm
O2S12 HO2S12 Sensor 0.43 0.85 0.84 0.75 VOLTS
OCTADJ_R_LRND PID -7.09 -7.09 0.11 0.11 %
RO2FT1 PID 0 -1.06 -0.98 1 %
RPM CKP Sensor 0 748.50 1230.75 2398.50 RPM
SHRTFT1 PID (D) -10 TO +10 -10 TO +10 -10 TO +10 %
SYNC PID YES YES YES YES YES/NO
TP1 ETBTPS 4.2/15.68 4.49/9.80 4.39/11.76 4.16/16.47 VOLTS/%
TP2 ETBTPS 0.79/15.68 0.51/10.19 0.64/12.15 0.77/16.86 VOLTS/%
TPMODE PID PT CT PT PT CLOSED/PART/WIDE OPEN THROTTLE
VCT_EXH_ACT1 PID 0 0.56 43.93 46.18 DEG
VCT_EXH_DIF1 PID 0 -0.56 -0.43 -1.18 DEG
VCT_INT_ACT1 PID 0 -0.62 -0.93 0.87 DEG
VCT_INT_DIF1 PID 0 0.62 0.93 -0.87 DEG
VCTSYS PID OPEN LOOP CLOSED LOOP CLOSED LOOP CLOSED LOOP OPEN LOOP/CLOSED LOOP
VSS PID 0 0 48 KM/H (30 MPH) 89 KM/H (55 MPH) km/h/MPH
Outputs Component/PID Only Measured/PID Values Units Measured/PID
KOEO Hot Idle 48 KM/H (30 MPH) 89 KM/H (55 MPH)
ETC [TAC_PCT] PID 9.41 1.17 5.49 3.52 %
EVAP020C PID NO NO NO NO YES/NO
EVAPCP EVAPCP Valve 0 24.60 11.73 79.58 %
EVAPSOAK PID YES YES YES YES YES/NO
EVAPSTA PID NOT RUNNING NOT RUNNING NOT RUNNING NOT RUNNING STATUS
FP Fuel Pump Control Module 96.07/OFF 43.80/ON 44.02/ON 43.68/ON %/ON/OFF
FUELSYS PID OPEN LOOP CLOSED LOOP CLOSED LOOP CLOSED LOOP OPEN/CLOSED LOOP
HTR11 HO2S11 Sensor OFF ON ON ON ON/OFF
HTR12 HO2S12 Sensor OFF ON ON ON ON/OFF
INJ1-4_OFF Injector 1-4 -- -- -- -- --/DISABLE
LFC PID OFF OFF OFF OFF ON/OFF
MIL PID OFF OFF OFF OFF ON/OFF
O2S11_HTR HO2S11 Sensor 20.39 36.07 31.37 29.41 %
O2_DS_DISBL PID YES NO NO NO YES/NO
SPARKADV PID 23.50 8.25 37.50 30.25 DEG
TQ_CNTRL PID NONE REQUESTED IDLE SPEED CONTROL NONE REQUESTED CRUISE CONTROL STATUS
VCT_EXH_DC1 VCT12 Solenoid 0 0 38.41 37.54 %
VCT_INT_DC1 VCT11 Solenoid 0 0 0 0 %
Other Component/PID Only Measured/PID Values Units Measured/PID
KOEO Hot Idle 48 KM/H (30 MPH) 89 KM/H (55 MPH)
VPWR PID VBAT VBAT VBAT VBAT VOLTS
VREF PID 5 5 5 5 VOLTS
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.