Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2021EDGE SE, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 182 (FOUR-WHEEL DRIVE SYSTEMS)DIAGNOSIS AND TESTINGFOUR-WHEEL DRIVE SYSTEMS - MECHANICAL SHIFTPINPOINT TESTSPINPOINT TEST F : MANUAL SHIFT-ON-STOP (MSOS) FUNCTIONAL TESTPINPOINT TEST F : MSOS FUNCTIONAL TEST
2021 Ford Edge SE, 4WD
Pinpoint Test F : MSOS Functional Test
2021 Ford Edge SE, 4WDSECTION Pinpoint Test F : MSOS Functional Test
WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Vehicles equipped with the Manual Shift-On-Stop (MSOS) system and manual hublocks should not be operated in 4H or 4L mode with the hublocks set to the FREE position. Doing so can result in damage to driveline components.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.