Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
PDM DTC Chart
2021 Ford Edge SE, 4WDSECTION PDM DTC Chart
WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
| DTC | Description | Action |
|---|---|---|
| B118D:11 | Right Blind Spot Warning Indicator: Circuit Short To Ground | GO to Pinpoint Test D |
| B118D:15 | Right Blind spot Warning Indicator: Circuit Short To Battery or Open | If the RHBLIS®/ CTALED is inoperative, GO to Pinpoint Test D If the RHBLIS®/ CTALED is always on, GO to Pinpoint Test C |
| All other PDM Diagnostic Trouble Codes (DTCs) | - | REFER to: Locks, Latches and Entry Systems . |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.