Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
DTC Chart: FCIM
2021 Ford Edge SE, 4WDSECTION DTC Chart: FCIM
WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
FCIM DTC Chart
| DTC | Description | Action |
|---|---|---|
| B1034:11 | Left Front Seat Heater Element: Circuit Short To Ground | GO to Pinpoint Test I |
| B1034:15 | Left Front Seat Heater Element: Circuit Short To Battery or Open | GO to Pinpoint Test I |
| B1036:11 | Right Front Seat Heater Element: Circuit Short To Ground | GO to Pinpoint Test J |
| B1036:15 | Right Front Seat Heater Element: Circuit Short To Battery or Open | GO to Pinpoint Test J |
| B1038:11 | Left Front Seat Heater Sensor: Circuit Short To Ground | GO to Pinpoint Test I |
| B1038:15 | Left Front Seat Heater Sensor: Circuit Short To Battery or Open | GO to Pinpoint Test I |
| B103A:11 | Right Front Seat Heater Sensor: Circuit Short To Ground | GO to Pinpoint Test J |
| B103A:15 | Right Front Seat Heater Sensor: Circuit Short To Battery or Open | GO to Pinpoint Test J |
| All other Diagnostic Trouble Codes (DTCs) | - | Refer to the appropriate Information And Entertainment System article for the procedure. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.