Connector End View (C856) - INLINE

2021 Ford Edge SE, 4WDSECTION Connector End View (C856) - INLINE
WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
Inline: Description Color Harness Base Part # Service Pigtail
C856 INLINE 14A00514632 Not Available

MALE 

Harness 

14A005

FEMALE 

Harness 

14632

GFDWR56459Courtesy of FORD MOTOR COMPANY
GFDWR56460Courtesy of FORD MOTOR COMPANY
Terminal Part Number  Service Part Number  Size 
9U5T-14421-BA EU2Z-14421-BA 0.64
DU5T-14421-FA EU2Z-14421-BA 0.64
EU5T-14421-BA EU2Z-14421-DA 2.8
8U5T-14474-BB DU2Z-14474-CA 0.64
9U5T-14421-CA EU2Z-14421-BA 0.64
F8VB-14474-AA EU2Z-14474-AB 2.8
DU5T-14474-HBB Not Available
EU5T-14421-HA EU2Z-14421-DA 2.8
Pin  Circuit  Gauge  Qualifier  Terminal Part Number 
1 CR122 (WH-OG) 18 9U5T-14421-BA
2 RR122 (BN) 18 9U5T-14421-BA
3 CPL39 (YE) 22 DU5T-14421-FA
4 CPW18 (GY-VT) 22 DU5T-14421-FA
5 CPW17 (BN-GN) 22 DU5T-14421-FA
6 VME12 (BN-WH) 20 9U5T-14421-CA
7 RME12 (BN-BU) 20 9U5T-14421-CA
8 CPW14 (VT-WH) 22 9U5T-14421-BA
9 CR179 (BU) 18 9U5T-14421-BA
10 RR179 (GY-BU) 18 9U5T-14421-BA
11 GD348 (BK-VT) 22 EU5T-14421-HA
12 * * N/A
13 * * N/A
14 CBP38 (GY-BU) 10 EU5T-14421-BA
15 * * N/A
16 * * N/A
Pin  Circuit  Gauge  Qualifier  Terminal Part Number 
1 CR122 (WH-OG) 18 8U5T-14474-BB
2 RR122 (BN) 18 8U5T-14474-BB
3 CPL39 (YE) 22 8U5T-14474-BB
4 CPW18 (GY-VT) 22 8U5T-14474-BB
5 CPW17 (BN-GN) 22 8U5T-14474-BB
6 VME12 (BN-WH) 18 8U5T-14474-BB
7 RME12 (BN-BU) 18 8U5T-14474-BB
8 CPW14 (VT-WH) 22 8U5T-14474-BB
9 CR179 (BU) 18 8U5T-14474-BB
10 RR179 (GY-BU) 18 8U5T-14474-BB
11 GD348 (BK-YE) 22 DU5T-14474-HBB
12 * * N/A
13 * * N/A
14 CBP38 (GY-BU) 10 F8VB-14474-AA
15 * * N/A
16 * * N/A
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.