Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Connector End View (C218D) - CLOCKSPRING
2021 Ford Edge SE, 4WDSECTION Connector End View (C218D) - CLOCKSPRING
WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
| Connector: | Description | Color | Harness | Base Part # | Service Pigtail | |
|---|---|---|---|---|---|---|
| C218D | CLOCKSPRING | PIA | part# N/A | See Below | ||
| Terminal Part Number | Service Part Number | Size |
|---|---|---|
| Pin | Circuit | Gauge | Circuit Function | Qualifier | Terminal Part Number | |||
|---|---|---|---|---|---|---|---|---|
| 1 | CR101 (WH) | * | CTRL MOD. - AIR BAG DRIVER 1 + | N/A | ||||
| 2 | RR101 (BU) | * | CTRL MOD. - AIR BAG DRIVER 1 - | N/A | ||||
Available Pigtail Kits
Pigtail Kit Part Number WPT-965
Service Part Number:
3U2Z-14S411-AEB
Gauge:
14
Pin material:
Silver
Cavities:
2
Vehicle Uses:
- Actuator - Door Lock - Decklid/Liftgate
- Element - Heated Seat
- Lamp - CHMSL (Center High Mount Stop Lamp)
- Module - Heated Seat
- Motor - Adjustable Pedal
- Motor - Decklid / Liftgate
- Sensor - Air Charge Temperature
- Sensor - EATC In Car Temperature
- Speaker - Subwoofer
- Switch - Adjustable Pedal
- Switch - Brake Deactivation
- Switch - Brake Pressure
- Switch - Clutch Pedal Position
- Switch - Stop Lamp
- Switch - Third Row Power Folding Seat
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.