Ground and G402 Location

2021 Ford Edge SE, 4WDSECTION Ground and G402 Location
WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
GFDW83180Courtesy of FORD MOTOR COMPANY
GFDW83181Courtesy of FORD MOTOR COMPANY
GFDW83182Courtesy of FORD MOTOR COMPANY
GFDW83183Courtesy of FORD MOTOR COMPANY
GFDW83184Courtesy of FORD MOTOR COMPANY
GFDW83185Courtesy of FORD MOTOR COMPANY
GFDW83186Courtesy of FORD MOTOR COMPANY
GFDW83187Courtesy of FORD MOTOR COMPANY
GFDW83188Courtesy of FORD MOTOR COMPANY
GFDW83189Courtesy of FORD MOTOR COMPANY
GFDW83190Courtesy of FORD MOTOR COMPANY
GFDW83191Courtesy of FORD MOTOR COMPANY
GFDW83192Courtesy of FORD MOTOR COMPANY
GFDW83193Courtesy of FORD MOTOR COMPANY
GFDW83194Courtesy of FORD MOTOR COMPANY
GFDW83195Courtesy of FORD MOTOR COMPANY
GFDW83196Courtesy of FORD MOTOR COMPANY
GFDW83197Courtesy of FORD MOTOR COMPANY
GFDW83198Courtesy of FORD MOTOR COMPANY
GFDW83199Courtesy of FORD MOTOR COMPANY
GFDW83200Courtesy of FORD MOTOR COMPANY
GFDW83201Courtesy of FORD MOTOR COMPANY
GFDW83202Courtesy of FORD MOTOR COMPANY
GFDW83203Courtesy of FORD MOTOR COMPANY
GFDW83204Courtesy of FORD MOTOR COMPANY
GFDW83205Courtesy of FORD MOTOR COMPANY
GFDW83206Courtesy of FORD MOTOR COMPANY
GFDW83207Courtesy of FORD MOTOR COMPANY
GFDW83208Courtesy of FORD MOTOR COMPANY
GFDW83209Courtesy of FORD MOTOR COMPANY
Fig 1: G402 Ground Location
G00678709Courtesy of FORD MOTOR COMPANY
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.