Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2021EDGE SE, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 12 (ENGINE CONTROLS - POWERTRAIN DTC CHARTS & DESCRIPTIONS (DIESEL))DIAGNOSTIC TROUBLE CODE (DTC) CHARTS AND DESCRIPTIONSDTC P062C - INTERNAL CONTROL MODULE VEHICLE SPEED PERFORMANCE
2021 Ford Edge SE, 4WD
DTC P062C - Internal Control Module Vehicle Speed Performance
2021 Ford Edge SE, 4WDSECTION DTC P062C - Internal Control Module Vehicle Speed Performance
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Ford Transit-350 HD, 2018 Ford Transit-350, 2018 Ford Transit-250, 2018 Ford Transit-150, and 2018 Ford F-550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
P062C - INTERNAL CONTROL MODULE VEHICLE SPEED PERFORMANCE
| Description: | This DTC sets when a network communication error occurred in the PCM. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | REPAIR any ABS or TCM DTCs. REPAIR any ABS or TCM related DTCs in other modules, or any vehicle communication concerns prior to diagnosing DTC P062C. The presence of this DTC may indicate the vehicle is operating in derate mode and may experience a loss of power. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST YA . | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.