Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Pinpoint Tests FB: Power Take Off (PTO): Introduction
2021 Ford Edge SE, 4WDSECTION Introduction
This pinpoint test is intended to diagnose the following:
- PTO switch
- PCM (12A650)
Powertrain Control Module (PCM) Connector
For PCM connector views or reference values, refer to Reference Values.
| Vehicle | Pin | Circuit |
|---|---|---|
| Motorhome/Stripped Chassis/Step Van | B25 B45 B20 B21 |
PTORPM PTOIL PTOENG PTO |
| Transit | B33 B80 B91 B87 |
PTORPM PTOIL PTOENG PTO |
| All other vehicles | B85 B98 B88 B84 |
PTORPM PTOIL PTOENG PTO |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.