U0140 - Lost Communication With Body Control Module

2021 Ford Edge SE, 4WDSECTION U0140 - Lost Communication With Body Control Module
DTC DESCRIPTION U0140 - LOST COMMUNICATION WITH BODY CONTROL MODULE

Description:  The PCM continuously monitors controller area network (CAN) for messages from body control module (BCM). This DTC sets when the PCM does not receive the BCM message within the defined amount of time.
Possible Causes: 
  • Communication error
Diagnostic Aids:  Check for other PCM DTCs or PCM related symptoms. Diagnose all other PCM DTCs or PCM related symptoms first.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to Pinpoint Test QA.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.