Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Fuel Control
2021 Ford Edge SE, 4WDSECTION Fuel Control
| DTC | Description | Action |
|---|---|---|
| P0087:00 | Fuel Rail/System Pressure - Too Low (Bank 1): No Sub Type Information | GO to Pinpoint Test DD |
| P0088:00 | Fuel Rail/System Pressure - Too High (Bank 1): No Sub Type Information | GO to Pinpoint Test DD |
| P0181:00 | Fuel Temperature Sensor A Circuit Range/Performance: No Sub Type Information | GO to Pinpoint Test DD |
| P0182:00 | Fuel Temperature Sensor A Circuit Low: No Sub Type Information | GO to Pinpoint Test DD |
| P0183:00 | Fuel Temperature Sensor A Circuit High: No Sub Type Information | GO to Pinpoint Test DD |
| P018B:00 | Fuel Pressure Sensor B Circuit Range/Performance: No Sub Type Information | GO to Pinpoint Test DD |
| P018C:00 | Fuel Pressure Sensor B Circuit Low: No Sub Type Information | GO to Pinpoint Test DD |
| P018D:00 | Fuel Pressure Sensor B Circuit High: No Sub Type Information | GO to Pinpoint Test DD |
| P0192:00 | Fuel Rail Pressure Sensor Circuit Low (Bank 1): No Sub Type Information | GO to Pinpoint Test DD |
| P0193:00 | Fuel Rail Pressure Sensor Circuit High (Bank 1): No Sub Type Information | GO to Pinpoint Test DD |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.