Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Network Message Chart
2021 Ford Edge SE, 4WDSECTION Network Message Chart
RGTM Network Input Messages
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Liftgate request | BCM | Used by the RGTM to open/close the liftgate when the BCM receives a valid request from a programmed RKE transmitter or the passive entry feature. |
| Gear lever position | PCM | Used by the RGTM to inhibit power liftgate operation if the transmission is not in PARK. |
| Power liftgate mode command | IPC | Used by the RGTM to enable/disable the power liftgate operation. |
| Vehicle lock status | BCM | Used by the RGTM to inhibit the power liftgate operation when the liftgate release switch is activated, unless the doors have been previously unlocked electronically. |
IPC Network Input Messages
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Power liftgate chime request | RGTM | Used by the IPC to sound the power liftgate chime. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.