Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2021BRONCO BADLANDS, 2D UTILITY, 2.7L ENG VIN P, PART TIME T/CASE CONTROLREPAIR AND DIAGNOSISQUICK LOOKUPSDTC INDEXDTC INDEX (POWER STEERING SYSTEM - WIPER SYSTEM AND WASHER SYSTEM)REAR VIEW MIRROR DTCS
2021 Ford Bronco Badlands, 2D Utility, 2.7L Eng VIN P, Part Time T/Case Control
Rear View Mirror DTCS
2021 Ford Bronco Badlands, 2D Utility, 2.7L Eng VIN P, Part Time T/Case ControlSECTION Rear View Mirror DTCS
| DTC | Description | Action |
|---|---|---|
| B1163:11 | Left Mirror Heater Output: Circuit Short To Ground | GO to Pinpoint Test B |
| B1163:15 | Left Mirror Heater Output: Circuit Short To Battery Or Open | GO to Pinpoint Test B |
| B1163:4B | Left Mirror Heater Output: Over Temperature | GO to Pinpoint Test B |
| B1C09:11 | Driver Left/Right Mirror Motor: Circuit Short To Ground | GO to Pinpoint Test A |
| B1C10:11 | Driver Up/Down Mirror Motor: Circuit Short To Ground | GO to Pinpoint Test A |
| B1164:11 | Right Mirror Heater Output: Circuit Short To Ground | GO to Pinpoint Test B |
| B1164:15 | Right Mirror Heater Output: Circuit Short To Battery Or Open | GO to Pinpoint Test B |
| B1164:4B | Right Mirror Heater Output: Over Temperature | GO to Pinpoint Test B |
| B1C11:11 | Passenger Left/Right Mirror Motor: Circuit Short To Ground | GO to Pinpoint Test A |
| B1C12:11 | Passenger Up/Down Mirror Motor: Circuit Short To Ground | GO to Pinpoint Test A |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.