Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2021BRONCO BADLANDS, 2D UTILITY, 2.7L ENG VIN P, PART TIME T/CASE CONTROLREPAIR AND DIAGNOSISQUICK LOOKUPSDTC INDEXDTC INDEX (ACCELERATION CONTROL SYSTEM - ELECTRONIC ENGINE CONTROLS)ACCELERATION CONTROL SYSTEM DTCS
2021 Ford Bronco Badlands, 2D Utility, 2.7L Eng VIN P, Part Time T/Case Control
Acceleration Control System DTCS
2021 Ford Bronco Badlands, 2D Utility, 2.7L Eng VIN P, Part Time T/Case ControlSECTION Acceleration Control System DTCS
| DTC | Description | Action |
|---|---|---|
| P060D:00 | Internal Control Module Accelerator Pedal Position Performance: No Sub Type Information | GO to Pinpoint Test DK |
| P1575:00 | Pedal Position Out Of Self Test Range: No Sub Type Information | GO to Pinpoint Test DK |
| P2122:00 | Throttle/Pedal Position Sensor/Switch D Circuit Low: No Sub Type Information | GO to Pinpoint Test DK |
| P2123:00 | Throttle/Pedal Position Sensor/Switch D Circuit High: No Sub Type Information | GO to Pinpoint Test DK |
| P2127:00 | Throttle/Pedal Position Sensor/Switch E Circuit Low: No Sub Type Information | GO to Pinpoint Test DK |
| P2128:00 | Throttle/Pedal Position Sensor/Switch E Circuit High: No Sub Type Information | GO to Pinpoint Test DK |
| P2138:00 | Throttle/Pedal Position Sensor/Switch D/E Voltage Correlation: No Sub Type Information | GO to Pinpoint Test DK |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.