Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2019TRANSIT-250 BASE, 2D CAB CHASSIS, 3.2L ENG VIN VREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 304 (OEM CONNECTOR END VIEWS - C2286 THROUGH C3265C)CONNECTOR END VIEW (C2409) - TELEMATICS MODULE
2019 Ford Transit-250 Base, 2D Cab Chassis, 3.2L Eng VIN V
Connector End View (C2409) - TELEMATICS MODULE
2019 Ford Transit-250 Base, 2D Cab Chassis, 3.2L Eng VIN VSECTION Connector End View (C2409) - TELEMATICS MODULE
WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
Color
BK
Harness
TBJ2009-FS
Base Part #
part# N/A
Service Pigtail
Not Available
| Pin | Circuit | Gauge | Circuit Function | Qualifier |
| 1 | HS1CANM (WH-BU) | 20 | HS1 CAN + | |
| 2 | HS1CANP (WH) | 20 | HS1 CAN - | |
| 3 | * | * | Not Used | |
| 4 | * | * | Not Used | |
| 5 | * | * | Not Used | |
| 6 | * | * | Not Used | |
| 7 | ADCINPUT (WH-RD) | 20 | ADC | |
| 8 | VB1 (GY-RD) | 20 | VBATT | |
| 9 | GND (BK-GY) | 20 | Ground | |
| 10 | OUTPUT1 (BN) | 20 | OUTPUT 1 | |
| 11 | INPUT2 (BU) | 20 | INPUT 2 | |
| 12 | INPUT1 (GY-RD) | 20 | INPUT 1 | |
| 13 | * | * | Not Used | |
| 14 | OUTPUT2 (YE) | 20 | OUTPUT 2 | |
| 15 | * | * | Not Used | |
| 16 | * | * | Not Used | |
| 17 | * | * | Not Used | |
| 18 | * | * | Not Used | |
| 19 | * | * | Not Used | |
| 20 | * | * | Not Used | |
| 21 | * | * | Not Used | |
| 22 | * | * | Not Used | |
| 23 | * | * | Not Used | |
| 24 | * | * | Not Used |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.