Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2019TRANSIT-150 BASE, 3.7L ENG VIN M, GAS/ETHANOLREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMESEATSADDITIONAL ROW SEATSREMOVAL AND INSTALLATIONFOURTH ROW SINGLE SEATREMOVAL
2019 Ford Transit-150 Base, 3.7L Eng VIN M, Gas/Ethanol
Fourth Row Single Seat: Removal
2019 Ford Transit-150 Base, 3.7L Eng VIN M, Gas/EthanolSECTION Removal
NOTE:
Removal steps in this procedure may contain installation details.
- Using a screwdriver, release the retainer and remove the seat frame bracket cover.
- Remove the seat frame bracket bolt.
Torque: 59 lb.ft (80 Nm)
- Open the seat bracket cover, remove the bolt, tilt forward and remove the single seat.
Torque: 59 lb.ft (80 Nm)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.