Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2019TRANSIT-150 BASE, 3.7L ENG VIN M, GAS/ETHANOLREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTCOMMUNICATION DEVICESMODULE CONFIGURATIONDESCRIPTION AND OPERATIONMODULE CONFIGURATION - SYSTEM OPERATION AND COMPONENT DESCRIPTIONMODULE CONFIGURATION AND PARAMETER CHARTDIRECT CONFIGURATION
2019 Ford Transit-150 Base, 3.7L Eng VIN M, Gas/Ethanol
Direct Configuration
2019 Ford Transit-150 Base, 3.7L Eng VIN M, Gas/EthanolSECTION Direct Configuration
| Module Name | Module Address | Programmable Module Installation (PMI) Available | Reprogram/Flash Capable | Requires Adaptive Learning or Calibration | Available Progammable Parameters |
|---|---|---|---|---|---|
| APIM | 7D0 | Yes | Yes | No | None |
| ABS module | 760 | Yes | Yes | Inertial Measurement Unit (IMU) calibration | None |
| ACM | 727 | Yes | Yes | No | None |
| BCM | 726 | Yes | Yes | No | DRL |
| FCIM | 7A7 | No | No | No | None |
| FCDIM | 7A5 | Yes | Yes | No | None |
| GPSM (without touchscreen) | 701 | Yes | Yes | No | None |
| IPC | 720 | Yes | Yes | No | None |
| IPMA | 706 | Yes | Yes | No | None |
| PAM | 736 | No | No | No | None |
| PCM | 7E0 | Yes | Yes | Yes | VIN |
| RCM | 737 | Yes | Yes | No | None |
| RBM | 766 | No | No | No | None |
| SASM | 797 | No | No | No | None |
| TBM | 757 | No | No | No | None |
| TRM | 791 | Yes | Yes | No | None |
| TCM (diesel engine) | 7E1 | Yes | Yes | No | None |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.