DTC P162E - Internal Control Module PTO Control Performance

2019 Ford Explorer XLT, 2.3L Eng VIN H, FWDSECTION DTC P162E - Internal Control Module PTO Control Performance
DTC DESCRIPTION P162E - INTERNAL CONTROL MODULE PTO CONTROL PERFORMANCE

Description:  The DTC sets when the activation conditions of the power take off (PTO) are not met and the PTO is still being enabled by the PCM to run.
Possible Causes: 
  • Module reprogramming
  • Aftermarket performance products
  • Damaged PCM
Diagnostic Aids:  This DTC may be accompanied by other DTCs. Check for other DTCs and diagnose those first. If no DTCs are present, continue to follow diagnosis for this DTC.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST FB .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.