Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Clutch Pedal Position (CPP) Sensor
The CPP signal is converted to percent of pedal travel by the PCM. During normal operation, the CPP is used as the indication of the clutch pedal position by the PCM strategy.
There is 1 reference voltage circuit, 1 signal return circuit, and 1 signal circuit between the PCM and the CPP sensor. The CPP sensor is typically mounted on the clutch master cylinder or pedal assembly.
| Item | Number | Description |
|---|---|---|
| 1 | - | Clutch Master Cylinder |
| 2 | - | CPP Sensor Assembly |
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.