Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2019EXPLORER LIMITED, 3.5L ENG VIN 8, AWDREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSFLUIDS
2019 Ford Explorer Limited, 3.5L Eng VIN 8, AWD
Quick Lookups: Fluids
2019 Ford Explorer Limited, 3.5L Eng VIN 8, AWDSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 3.5L Eng,AWD | w/o Eco Boost Engine | 7.30 OZS. | 0.21 L | MOTORCRAFT PAG Refrigerant Compressor Oil YN-12-D | S | |
| Air Cond Compressor Oil | w/Eco Boost Engine,Front & Rear | 7.30 OZS. | 0.21 L | MOTORCRAFT PAG Refrigerant Compressor Oil YN-12-D | S | ||
| Air Cond Compressor Oil | w/Eco Boost Engine,Front | 5.60 OZS. | 0.16 L | MOTORCRAFT PAG Refrigerant Compressor Oil YN-12-D | S | ||
| Air Cond Refrigerant | 3.5L Eng,AWD,Normally Aspirated | 2.38 LBS. | 1.07 KG | R-134a | S | ||
| Air Cond Refrigerant | w/Eco Boost Engine,Front & Rear A/C | 2.80 LBS. | 1.27 KG | R-134a | S | ||
| Air Cond Refrigerant | w/Eco Boost Engine,Front A/C | 2.10 LBS. | 0.95 KG | R-134a | S | ||
| Automatic Transmission Fluid | 3.5L Eng,Trans Mfr CD 6F50 | 10.90 QTS. | 10.31 L | MOTORCRAFT Automatic Transmission Fluid MERCON LV | Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. Automatic Transmission that require MERCON LV should only use MERCON LV ATF. | S | |
| Brake Fluid | N/A | N/A | MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent. | Use only MOTOCRAFT DOT 4 LV High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2 and ISO 4925 Class 6. Use of any fluid other than the recommended fluid may cause brake system damage. Fill between "max" and "min" lines on reservoir. | S | ||
| Differential Gear Oil | AWD | Rear | 2.11 PTS. | 0.99 L | MOTORCRAFT SAE 80W-90 Premium Rear Axle Lubricant | S | |
| Engine Coolant | 3.5L Eng | w/o Oil Cooler | 12.40 QTS. | 11.73 L | MOTORCRAFT Orange Antifreeze/Coolant Prediluted | Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary. | S |
| Engine Coolant | 3.5L Eng | w/Oil Cooler | 13.50 QTS. | 12.77 L | MOTORCRAFT Orange Antifreeze/Coolant Prediluted | Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary. | S |
| Engine Oil | 3.5L Eng | w/Filter,w/Eco Boost Engine | 6.00 QTS. | 5.67 L | MOTORCRAFT SAE 5W-30 Premium Synthetic Blend Motor Oil | To improve engine cold start performance use: MOTORCRAFT SAE 0W-30 Synthetic Blend Motor Oil. | S |
| Engine Oil | 3.5L Eng | w/Filter,w/o Eco Boost Engine | 6.00 QTS. | 5.67 L | MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil | To improve engine cold start performance use: MOTORCRAFT SAE 0W-20 Synthetic Blend Motor Oil. | S |
| Fuel Tank | 18.60 GALS. | 70.4 L | S | ||||
| Transfer Case Fluid | 3.5L Eng | Power Transfer Unit | 0.60 QTS. | 0.56 L | MOTORCRAFT SAE 75W-140 Synthetic Rear Axle Lubricant | S | |
| Windshield Washer Fluid | N/A | N/A | MOTORCRAFT Premium Windshield Washer Concentrate Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.