Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
2019 Ford Escape SEL, 1.5L Eng VIN D, FWD
Quick Lookups: Fluids
2019 Ford Escape SEL, 1.5L Eng VIN D, FWDSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | Turbocharger | 2.70 OZS. | 0.07 L | PAG Oil YN-35 | S | ||
| Air Cond Refrigerant | 1.40 LBS. | 0.63 KG | R-1234yf | S | |||
| Automatic Transmission Fluid | 9.00 QTS. | 8.51 L | MOTORCRAFT Automatic Transmission Fluid MERCON LV | Approximate dry fill capacity. Actual amount may vary during fluid changes. Automatic Transmission that require MERCON LV should only use MERCON LV ATF. | S | ||
| Brake Fluid | N/A | N/A | MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent. | Use only MOTOCRAFT DOT 4 LV High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2 and ISO 4925 Class 6. Use of any fluid other than the recommended fluid may cause brake system damage. Fill between "max" and "min" lines on reservoir. | S | ||
| Engine Coolant | 1.5L Eng | w/Eco Boost Engine | 12.50 QTS. | 11.82 L | MOTORCRAFT Orange Antifreeze/Coolant Prediluted | Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary. | S |
| Engine Oil | 1.5L Eng | w/Filter,w/Eco Boost Engine | 4.30 QTS. | 4.06 L | MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil | S | |
| Fuel Tank | 15.70 GALS. | 59.43 L | S | ||||
| Transfer Case Fluid | Power Transfer Unit | 0.56 QTS. | 0.52 L | MOTORCRAFT SAE 75W-140 Synthetic Rear Axle Lubricant | S | ||
| Windshield Washer Fluid | N/A | N/A | MOTORCRAFT Premium Windshield Washer Concentrate Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.