DTC P061D - Internal Control Module Engine Air Mass Performance

2019 Ford Escape SEL, 1.5L Eng VIN D, FWDSECTION DTC P061D - Internal Control Module Engine Air Mass Performance
DTC DESCRIPTION P061D - INTERNAL CONTROL MODULE ENGINE AIR MASS PERFORMANCE

Description:  This DTC sets when an error occurs in the PCM.
Possible Causes: 
  • Aftermarket performance products
  • Software incompatibility issue
Diagnostic Aids: 
An intake air system leak at a hose, line or connection of any intake air system component may cause this DTC to set. Aftermarket modifications to the intake air system may cause this DTC to set.
Verify the PCM is at the latest calibration level.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST QE .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.