Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2018TRANSIT-350 BASE, VAN CARGO EXTENDED, 3.2L ENG VIN VREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSWIRING DIAGRAMSOEM CONNECTOR END VIEWS C805A - C2142CONNECTOR VIEWSCONNECTOR END VIEW (C2035) - PARKING AID SWITCH
2018 Ford Transit-350 Base, Van Cargo Extended, 3.2L Eng VIN V
Connector End View (C2035) - PARKING AID SWITCH
2018 Ford Transit-350 Base, Van Cargo Extended, 3.2L Eng VIN VSECTION Connector End View (C2035) - PARKING AID SWITCH
| Connector: | Description | Color | Harness | Base Part # | Service Pigtail |
|---|---|---|---|---|---|
| C2035 | PARKING AID SWITCH | BK | 14K024 | part# N/A | See Below |
| Terminal Part Number | Service Part Number | Size |
|---|---|---|
| 9U5T-14474-LA | DU2Z-14474-BA | 0.64 |
| 9U5T-14474-MA | DU2Z-14474-BA | 0.64 |
| Pin | Circuit | Gauge | Circuit Function | Qualifier | Terminal Part Number | |||
|---|---|---|---|---|---|---|---|---|
| 1 | CMP02 (GN-BU) | 22 | CTRL MOD. - PARKING AID # INDICATOR STATUS | 9U5T-14474-LA | ||||
| 2 | GD184 (BK-GY) | 22 | GROUND - CROSS CAR BEAM # 4TH POINT | 9U5T-14474-MA | ||||
| 3 | CLN17 (BN) | 22 | SWITCH - IP/SWITCH ILLUMINATION | 9U5T-14474-LA | ||||
| 4 | * | * | Not Used | N/A | ||||
| 5 | GD184 (BK-GY) | 22 | GROUND - CROSS CAR BEAM # 4TH POINT | 9U5T-14474-LA | ||||
| 6 | CMP18 (GN-BN) | 22 | SWITCH - PARKING AID | 9U5T-14474-LA | ||||
Available Pigtail Kits
Pigtail Kit Part Number WPT-1237
Service Part Number:
3U2Z-14S411-PNB
Gauge:
18
Pin material:
Silver
Cavities:
6
Vehicle Uses:
- Switch - Hazard Warning
- Switch - Message Center
- Switch - Start/Stop
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.