SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2018TRANSIT-350 BASE, VAN CARGO EXTENDED, 3.2L ENG VIN VREPAIR AND DIAGNOSIS (SINGLE PAGE)BRAKESBRAKES CONTROL SYSTEMSABS GUIDED ROUTINE TESTINGPINPOINT TESTSPINPOINT TESTS SA: ABS MODULE COMMUNICATION CONCERN WITH THE PARK BRAKE CONTROL MODULENORMAL OPERATION AND FAULT CONDITIONS
2018 Ford Transit-350 Base, Van Cargo Extended, 3.2L Eng VIN V

Normal Operation and Fault Conditions

2018 Ford Transit-350 Base, Van Cargo Extended, 3.2L Eng VIN VSECTION Normal Operation and Fault Conditions

With the ignition ON, the EPB module sends messages to the ABS module over the HS-CAN 2. If the ABS module does not receive these messages within the specified time frame, the ABS module sets DTCs. This can be due to a EPB module failure, a circuit failure on the network or an excessive load on the network. For information on the messages sent to the ABS module by the EPB module, refer to Anti-Lock Brake System (ABS) and Stability Control article Description and Operation. 

PPT SA - ABS MODULE DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
U0128:00 Lost Communication With Park Brake Control Module: No Sub Type Information With the ignition ON, the EPB module sends messages to the ABS module over the HS-CAN2. If the ABS module does not receive these messages within the specified time frame, the module sets a DTC. This can be due to a EPB module failure, a circuit failure on the network or an excessive load on the network. For information on the messages sent to the ABS module by the EPB module, refer to Anti-Lock Brake System (ABS) and Stability Control article, Description and Operation.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.