Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2018TRANSIT CONNECT XL, VAN CARGOREPAIR AND DIAGNOSISBRAKESBRAKES CONTROL SYSTEMSABS GUIDED ROUTINE TESTINGPINPOINT TESTSPINPOINT TESTS AF: ABS MODULE VIN MISMATCHNORMAL OPERATION AND FAULT CONDITIONS
2018 Ford Transit Connect XL, Van Cargo
Normal Operation and Fault Conditions
2018 Ford Transit Connect XL, Van CargoSECTION Normal Operation and Fault Conditions
When the ignition is in RUN, the ABS module and the PCM share VIN information through the GWM over the HS-CAN 1 and HS-CAN 2.
PPT AF ABS MODULE DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fautl Trigger Conditions |
|---|---|---|
| U3002:62 | Vehicle Identification Number: Signal Compare Failure | Sets when the VIN message sent by the PCM over the HSCAN does not match the VIN stored in the ABS module. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.