Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Pinpoint Test B : Both Front Power Windows Are Inoperative: Notes
Refer to Power Windows for schematic and connector information.
Normal Operation and Fault Conditions
The front windows share the same fuse and common ground circuit (provided through the master window control switch).
Possible Sources
- Fuse
- Wiring, terminals or connectors
- Master window control switch
Visual Inspection and Diagnostic Pre-checks
- Verify that BJB fuse 29 (25A) is OK.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.