Network Message Chart - Power Windows

2018 Ford Transit Connect XL, Van CargoSECTION Network Message Chart - Power Windows

Passenger Door Module (PDM) Network Input MessagesΒ 

Broadcast Message Originating Module Message Purpose
Passenger window command DDM When activating the passenger front or rear windows from the master window control switch, the passenger window command is sent from the DDM to the PDM.
Rear window disable command DDM When the lock-out switch (located in the master window control switch) is in the LOCK position, the DDM sends this command to the PDM to disable the passenger rear window from operating from the RH rear window control switch.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.