Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2018TRANSIT CONNECT XL, VAN CARGOREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSDTC INDEXREAR VIEW MIRROR DTCSWITH: ONE-TOUCH OPEN AND CLOSE FRONT WINDOWSPDM
2018 Ford Transit Connect XL, Van Cargo
With: One-Touch Open and Close Front Windows: PDM
2018 Ford Transit Connect XL, Van CargoSECTION PDM
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| B11BD:11 | Mirror Fold Relay: Circuit Short To Ground | GO to Pinpoint Test E |
| B11BD:15 | Mirror Fold Relay: Circuit Short To Battery or Open | GO to Pinpoint Test E |
| B12D8:11 | Mirror Heater Output: Circuit Short To Ground | GO to Pinpoint Test D |
| B12D8:15 | Mirror Heater Output: Circuit Short To Battery Or Open | GO to Pinpoint Test D |
| B1302:11 | Mirror Motor Common: Circuit Short To Ground | GO to Pinpoint Test C |
| B1302:15 | Mirror Motor Common: Circuit Short To Battery or Open | GO to Pinpoint Test C |
| B1C11:11 | Passenger Left/Right Mirror Motor: Circuit Short To Ground | GO to Pinpoint Test C |
| B1C11:15 | Passenger Left/Right Mirror Motor: Circuit Short To Battery or Open | GO to Pinpoint Test C |
| B1C12:11 | Passenger Up/Down Mirror Motor: Circuit Short To Ground | GO to Pinpoint Test C |
| All other Diagnostic Trouble Codes (DTCs) | - | REFER to: Locks, Latches And Entry Systems - Vehicles With: One-Touch Open And Close Front Windows . |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.